Zinsser Bin Shellac-base Interior And Spot Exterior Primer Flat White 1 Gal Bucket/pail 2/Case

Zinsser® SKU: RST320991CT

Zinsser Bin Shellac-base Interior And Spot Exterior Primer Flat White 1 Gal Bucket/pail 2/Case

Zinsser® SKU: RST320991CT
Write a review
$163.06 Regular price
/
  • In stock
  • Inventory on the way
  • Brand: Zinsser®
  • MPN: #320991CT made by Zinsser®
  • Order Processing: 1-2 Business Days + Delivery Time
Looking for a “silver bullet” primer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser® BIN® Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN® Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it's designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details).
Ship Class Code A
Paint Sub-Category Primer, Shellac-Based
Binder/Vehicle Ingredient(s) Shellac
Diluent/Solvent Ingredient(s) Denatured Alcohol
Application Temperature Range 0º and 90ºF
Applicable Surface Material Cement
Maximum Coverage Area 500 sq ft
Cure/Dry-Time Range 20 min (Touch)
Disclaimer Statement B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15°F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.
Footnote 1 Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils
Footnote 2 Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils
Product Compostability Indicator N
Product Biodegradability Indicator N
Color Family White
Product Biodegradability in Days 0
Finish/Sheen Flat
Post-Consumer Recycled Content Percent 0%
Pre-Consumer Recycled Content Percent 0%
Total Recycled Content Percent 0%
Color(s) White
Volume Capacity 1 gal
Packaging Type Bucket/Pail
Global Product Type Building/Construction Paints & Primers
Recommended Level of Ventilation Moderate
Application Method Brush
Age Recommendation Ages 16 and Up
Intended Application Environment Interior/Exterior
Manufacturer Zinsser®
Brand Zinsser®
Processing Time 1-2 Business Days
Mpn 320991CT
Recently viewed